setupdoc

Polling rate test

This test measures a computer mouse. On a phone it would measure the touchscreen, not a mouse. Open it on your PC.

NowMove the mouse in fast circles inside the yellow box.

0Move the mouse in fast circles here
HzNot tested

Your result will appear here, with the fix if something is wrong.

Now
–
Average
–
Maximum
–
Screen refresh
–

Guide and FAQ

Move your mouse in fast circles. setupdoc shows how many times per second it reports its position and which setting that matches.

How the polling rate checker works

  1. Open the page in Chrome or Edge for the most accurate figure.
  2. Move the mouse in fast circles inside the yellow box, without stopping.
  3. After about two and a half seconds of steady movement, the result rounds to the nearest standard setting: 125, 250, 500, 1000, 2000, 4000 or 8000 Hz.
  4. You see the rate now, the average and the maximum, plus your screen’s refresh rate.

Polling rate is how often the mouse tells the computer where it is. At 125 Hz that is every 8 ms; at 1000 Hz, every 1 ms; at 8000 Hz, every 0.125 ms.

What the result means

MeasuredTypical mouseComment
About 125–133 HzOffice or Bluetooth mouseFine for work; a gaming mouse at this rate is on its lowest setting
250–500 HzOlder or budget gaming miceGood for most games
1000 HzMost gaming miceThe usual choice
2000–8000 HzRecent high-end miceSmoother on high refresh screens; costs CPU and battery

If your browser can only see one event per screen frame, the test says so instead of showing a wrong number.

Why Chrome and Edge measure higher

Chrome and Edge can hand the page raw mouse events, so they see every report from a fast mouse. Firefox and Safari may group events to the screen’s frame rate (for example 60, 120 or 144 per second), so a 1000 Hz mouse can look like 144 Hz. setupdoc detects that and tells you to open the page in Chrome or Edge for the real figure.

What polling rate should I use? 1000 vs 8000 Hz

For most people 1000 Hz is the right setting: it is smooth, responsive and light on the computer.

Higher rates (2000, 4000, 8000 Hz) cut the delay between reports from 1 ms to a fraction of a millisecond. The difference is small; it is easiest to notice as smoother movement on a high refresh screen (240 Hz or more). More Hz does not make you aim better by itself.

The costs are real: more CPU work, possible stutter in some games, especially on older computers, and shorter battery life on wireless mice. If a game stutters at 8000 Hz, drop to 2000 or 1000 Hz.

Change your polling rate

Gaming mice

  • Open the maker’s software (Logitech G Hub, Razer Synapse, SteelSeries GG…) and look for report rate or polling rate. Some mice also have a button underneath to change it.
  • Rates above 1000 Hz often need the newer receiver or a wired connection; check your model’s specifications.

Wireless mice

  • Use the USB receiver, not Bluetooth: Bluetooth usually stays at about 125–133 Hz.
  • Plug the receiver straight into the computer, close to the mouse, not into a hub or a monitor’s USB ports.

Office mice

Most office mice are fixed at 125 Hz with no setting to change. That is normal and not a fault.

Related tests

Check every button and the wheel with the mouse test, look for a worn switch with the double click test, and measure your clicking speed with the CPS test.

setupdoc vs other polling rate test sites

Top results for “polling rate test” in the US (checked on 17 Nov 2026):

SiteWhat you getWhat we noted
setupdocLive Hz rounded to the standard setting, average and maximum, screen refresh, a browser-limit warning and fixesNo ads
cpstest.orgPolling rate pageBlocked our check, so we could not review it
scrolltest.netTester and a very long guide (about 2,940 words)—
testufo.com/mouserateWell-known display and mouse tests (about 630 words)—
akkogear.euA tester on a store pageSells keyboards and mice
xbitlabs.comTester and an article (about 1,310 words)Heavy advertising

Word counts are approximate and include menus.

Frequently asked questions

How do I check my mouse polling rate?

Open this page in Chrome or Edge and move the mouse in fast circles inside the box for a few seconds. The result rounds to your mouse’s setting.

What polling rate should I use?

1000 Hz for most people and most games. Go higher only if your computer handles it without stutter and you have a high refresh screen.

Is 8000 Hz better than 1000 Hz?

Slightly smoother on fast screens, but it uses more CPU and battery, and some games stutter. The gain is a fraction of a millisecond.

Why does my gaming mouse show 125 Hz?

It is probably connected by Bluetooth or set to its lowest rate. Use the USB receiver or cable and set 1000 Hz in the maker’s software.

Why does Firefox or Safari show a lower number?

They may limit mouse events to the screen’s frame rate. The test detects it; open the page in Chrome or Edge for the real figure.

Does polling rate affect my CPS?

No. Polling rate is about movement reports, not clicks. Measure clicks with the CPS test.

More free tools